Automatically drains line at shutdown.
Reduces calcium and mineral buildup in line
and nozzle heads.
Normally open valve closed when energized.
1450 PSI Rated
Stainless Steel Body 1/4" FNPT ports
Coil continuous duty
Outdoor Rated
95003
24V AC Coil
95004
110V AC Coil
95005
220V AC Coil
95002
DIN Connector
FLEXIBLE TUBING CUTTER
Part Number
Specifications
92710
Flexible Tubing Cutter
To be used for all nylon and poly tubing
PULSE HOSE
Part Number
Size
93502
3/8” MNPT
Reduces line vibration
Installs on discharge line
HP DISCHARGE HOSES
Part Number
Size
92643
3/8” FNPT Swivelx3/8”
MNPT x 3’ Discharge Hose
To be installed between a rigid feed
line and the pump
BRASS FITTINGS
Part Number
Size
93186
1/4” MNPT x 1/4” MNPT
Miscellaneous brass fittings used for
pump and fog line assemblies
93185
3/8” MNPT x 1/4” MNPT
92648
3/8” MNPT x 3/8” MNPT
93116
1/2” MNPT x 3/8” MNPT
92649
1/2” MNPT x 1/2” MNPT
92679
3/4” MNPT x 3/4” MNPT
92561
3/4” x 1/2” FNPT
92562
3/4” x 3/4” FNPT
METERED INJECTORS
Part Number
Specifications
93319
2.5%
Accurate and reliable at all flow rates
Easy to use
Water- powered non-electric proportional
Chemical resistant
Built-in air bleeder
Low maintenance
Built-in bypass
Quick disconnect connectors
Lockable outside adjustment, tamper proof
Easily installed mounting bracket
93560
1%
THERMAL RELIEF VALVE
Part Number
Specifications
92629
1/2” MNPT
Protects your pump against damaging heat if pump is left in bypass for extended periods.
Mounts on pump bypass loop
Brass Body ½ MNPT
Viton internal O ring seal
Discharge port 1/8” FNPT
Hose barb included
Relief temp 145 F
LOW FLOW SAFETY SWITCH
Part Number
Specifications
95070
1/2” FNPT
* 1/4 GPM minimum flow requirement
Flow Switch contacts open with reduced flow
Used with contactor to control pump operation
Prevents pump damage due to no water or low water supply
LOW WATER SAFETY SWITCH
Part Number
Specifications
92509
1/4” FNPT
Reverse action pressure switch contacts open on falling pressure. Protects your pump.
NEMA 1 enclosure
Two pole
1 HP rated 115/230 volt
PUMP PAD
Part Number
Specifications
92715
Supports 1 thru 3 GPM pumps
High density polyethylene measures 24" x 24"
PUMP OIL
Part Number
Specifications
93222
16oz.
Industrial Pump Oil
95008
16oz.
Synthetic Pump Oil (for use with Promotional series 1000 PSI pumps only)
NOZZLE CLEANER
Part Number
Specifications
10103
8oz.
Calcium & Scale remover
Non-toxic
Bio-degradable
92597
1 GALLON
PRESSURE GUAGES 0-2K PSI
Part Number
Specifications
93108
2" Panel Mount Gauge 1/8" MNPT.
Glycerin filled
93585
2 1/2" Bottom Mount Gauge 1/4" MNPT
O-RINGS
Part Number
Specifications
10252
Nozzle O-Ring
Black Buna rubber
92927
O-Ring Slip Lok - High Pressure
BAR STOCK TEES
Part Number
Specifications
93118
1/4” FNPT
Misc bar stock TEE's
93223
1/2” FNPT
STAINLESS BALL VALVES
Part Number
Size
92631
1/4”x 1/4”
Two piece all stainless steel valve.
ANSI 316 SS ball, stem and body
1000 PSI. WOG valve rating PTFE
seats for long life. Valve can be locked
in either open or closed position.
Flows in either direction.
THERMOSTAT
Part Number
Specifications
93570
120/240 VAC
For use in agriculture, commercial,
and industrial applications.
Start your fogging equipment
automatically.
