FILTRATION

Due to the extremely small orifice size for all our fog nozzles, water filtration is a highly recommended addition to any system.

For smaller projects with up to 5 GPM flow, our standard 10" Slim Line Filter Housing and cartridge are recommended. The standard cartridge provides 5 micron filtration. When 1-micron filtration is required, it is recommended that it be used as a secondary filter along with a 5 micron pre-filter. Both cartridges are made from pure polypropylene.

To help offset the affects of calcium and other dissolved solids present in the water supply, we also offer a phosphate cartridge. This cartridge contains poly-crystals that dissolve over time and are able to surround calcium molecules preventing them from adhering to the nozzles or the surrounding area. The cartridge will not remove the dissolved solids. It is designed for water treatment only and should always be installed in front of the standard 5 micron polypropylene filter cartridge as a dual filtration setup.

For larger commercial projects up to 5-15 GPM, we offer the “Big Blue” with it’s unique 4.5” x 10” dual filter for effective system filtration.




Filtration
Part Number Description Capacity
GPM/LPM
Dimensions Weight
lbs
10109 In-line calcium inhibitor filter 0.5/2.0 2"dia. x 6.5" .54
92608 9¾ filter cartridge 5 micron 5/19 2.75"dia. x 10" .38
92603 9¾ filter cartridge 1 micron 5/19 2.75"dia. x 10" .38
92526 9¾ pleated washable 10 micron cartridge 5/19 2.75"dia. x 10" .38
93039 9¾ Phosphate cartridge 3/12 3"dia. x 9.625" 2.4
92609 10" filter housing with 1/2" ports 5/19 4.5"dia. x 12" 2.0
92611 10" dual filter housing with 1" ports 30/114 7.5"dia. x 13" 4.5
92612 10" dual filter cartridge 25/1 micron 15/57 4.5"dia. x 10" 1.0
95022 Mounting bracket for 92609
95024 Replacement O-ring for 92609



This page is about: Filtration, Water Filtration, and Effective System Filtration