The nozzles and the auto drain valve may periodically become clogged due to minerals in the water. If
necessary, remove them from the system and soak in Fogco Nozzle Cleaner for 30 minutes.
Always remove the nozzles and auto drain valve from the system during the winter months or if the system will
not be used for a prolonged period of time. Flush the system before re-installing. Always drain the water from
the pump if there is a danger of freezing.
The Slip-Lok system can be dis-assembled if replacement of the tubing or a fitting is required. To remove the
tubing, place an open-end wrench over the tubing and slide it until it is against the fitting. Pull the tubing away
from the fitting. Always cut the end of the tubing to obtain a clean edge before re-inserting.
If a leak develops at the point where the nozzle threads into a fitting, check to see that the o-ring is present and
is not cut or torn. Replace the o-ring if necessary and re-insert the nozzle into the system. Never remove
nozzles while the system is under pressure.
The Certified Series pumps have been tested by Underwriters Laboratory and Consultants Europe and are UL Approved and CE Certified. For additional information contact our Customer Service Department
Data Tables and Diagrams
The following Electric Data and Specifications tables provide additional specification information for the Premium, Certified, Professional, and Promotional pump ranges. Additional information is available upon request from our Customer service department.
Premium Series Electric Data and Specifications
Pump Model 60 Hz
Size GPM
Motor HP
Unit RPM
Volts / Phase
Full Load Amps
Dimensions Inches
Weight lbs
96100
1
1
490
110-1
12.6
26 x 16 x 12
110
96120
1
1
490
220-1
6.3
26 x 16 x 12
110
96200
2
1.5
930
110-1
15
26 x 16 x 12
118
96220
2
1.5
930
220-1
7.5
26 x 16 x 12
118
96300
3
3
630
220-1
13.5
26 x 16 x 12
130
All pumps specified for pressure output of 1000 PSI/70 BAR. Feed line inlet pressure should not exceed 75 PSI/5 BAR. Contact Customer Service for custom design pumps and for specifications for pumps larger than 3 GPM or for 50Hz pump specifications.
Certified Series Electric Data and Specifications
Pump Model 60 Hz
Size GPM
Motor HP
Unit RPM
Volts / Phase
Full Load Amps
Dimensions Inches
Weight lbs
92506
1
1
490
110-1
12.6
26 x 16 x 12
110
92676
1
1
490
220-1
6.3
26 x 16 x 12
110
92511
2
1.5
930
110-1
15
26 x 16 x 12
118
92677
2
1.5
930
220-1
7.5
26 x 16 x 12
118
92531
3
3
1475
220-1
13.5
26 x 16 x 12
130
Pump Model 50 Hz
Size LPM
Motor HP
Unit RPM
Volts / Phase
Full Load Amps
Dimensions Cm
Weight kg
92541
4
1
530
220-1
7.3
66 x 41 x 30
50
92542
8
1.5
1060
220-1
11.2
66 x 41 x 30
54
92543
12
2
1590
220-1
13
66 x 41 x 30
59
All pumps specified for pressure output of 1000 PSI/70 BAR. Feed line inlet pressure should not exceed 75 PSI/5 BAR. Contact Customer Service for pumps specifications larger than 3 GPM/12 LPM.
Professional Series Pulley Driven Electric Data and Specifications
Pump Model 60 Hz
Size GPM
Motor HP
Unit RPM
Volts / Phase
Full Load Amps
Dimensions Inches
Weight lbs
99100
1
1
460
110-1
14
21 x 16 x 11
92
99120
1
1
460
220-1
7
21 x 16 x 11
92
99200
2
1.5
920
110-1
17.4
21 x 16 x 11
100
99220
2
1.5
920
220-1
8.7
21 x 16 x 11
100
Pump Model 50 Hz
Size LPM
Motor HP
Unit RPM
Volts / Phase
Full Load Amps
Dimensions Cm
Weight kg
98400
4
1
490
220-1
7.3
53 x 40 x 28
41
98800
8
1.5
980
220-1
11.2
53 x 40 x 28
45
All pumps specified for pressure output of 1000 PSI/70 BAR. Feed line inlet pressure should not exceed 75 PSI/5 BAR.
Professional Series Direct Drive Electric Data and Specifications
Pump Model 60 Hz
Size GPM
Motor HP
Volts / Phase
Full Load Amps
Dimensions Inches
Weight lbs
96025.OV
.25
.5
110-1
7.4
8 X 22 X 10
55
92683.OV
.5
.5
110-1
7.4
8 x 22 x 10
55
92505.OV
1
.75
110-1
14
8 x 22 x 10
60
92510.OV
2
1.5
110-1
17.4
8 x 22 x 10
65
Pump Model 50 Hz
Size LPM
Motor HP
Volts / Phase
Full Load Amps
Dimensions Cm
Weight kg
92921.OV
1.5
.5
220-1
3.6
20 x 56 x 25
25
92521.OV
4.5
1
220-1
6.2
20 x 56 x 25
27
92549.OV
8.9
2
220-1
9.7
20 x 56 x 25
29
All pumps specified for pressure output of 1000 PSI/70 BAR. Feed line inlet pressure should not exceed 75 PSI/5 BAR.
Promotional Series Electric Data and Specifications
Pump Model 60 Hz
Size GPM
Motor HP
Volts / Phase
Full Load Amps
Dimensions Inches
Weight lbs
97100
1
.75
110-1
14
18 X 11 X 10
44
97150
1.5
1.5
110-1
17.4
21 X 11 X 10
62
97102
1
.75
220-1
7
18 X 11 X 10
44
97152
1.5
1.5
220-1
8.7
21 X 11 X 10
62
Pump Model 50 Hz
Size LPM
Motor HP
Volts / Phase
Full Load Amps
Dimensions Cm
Weight kg
97200
3.1
1
220-1
6.2
46 X 28 X 26
20
97250
4.7
1
220-1
6.2
53 X 28 X 26
26
All pumps specified for pressure output of 1000 PSI/70 BAR. Feed line inlet pressure should not exceed 75 PSI/5 BAR.
